flashscan not recognized

[blazinblue]

my flashscan v2 doesnt work anymore on my laptop. All i get is the windows message "usb device not recognized" it worked on my laptop 3 days ago. Ive tried to hook it up to two different laptops, two different cars, changed usb cables and still the same message. also tried to reset flashscan device to reset its settings still same. the flashscan device does power on and am able to navigate tru the menus. what could be going on?

[joecar]

You will have to reinstall the USB driver...

Try this: http://www.fishtuning.com/downloads/...and_I_cant.pdf

[blazinblue]

i already tried what it said on that document. my problem is that as soon as I plug in the usb cable to the device it says "one of the usb devices attached to this computer has malfunctioned. I tried it on two different computers..

[blazinblue]

looks like the usb6b1 chip is blown, got it shipped IRA@fishtuning yesterday. hopefully i will have it back soon. I was just gonna flash the tune after a cam install to my friends trans am when this happened.

[zacksfoam]

my flashscan v2 doesnt work anymore on my laptop. All i get is the windows message "usb device not recognized" it worked on my laptop 3 days ago. Ive tried to hook it up to two different laptops, two different cars, changed usb cables and still the same message. also tried to reset flashscan device to reset its settings still same. the flashscan device does power on and am able to navigate tru the menus. what could be going on?

mine is doing the same thing,worked just fine and now v2 and kingston both
usb units are not recognized,says that drivers are not loaded and when you
try to update,says most updated drivers are installed.It works fine on other
PC's

[joecar]

I pm'd Tech Support.

[Blacky]

...and now v2 and kingston both
usb units are not recognized,...

What is "kingston" that you refer to?

Regards
Paul

[mr.prick]

mine is doing the same thing,worked just fine and now v2 and kingston both
usb units are not recognized,says that drivers are not loaded and when you
try to update,says most updated drivers are installed.It works fine on other
PC's

It sounds like there is a problem with the USB port on your PC.

What is "kingston" that you refer to?

Regards
Paul

A USB flash drive?

[Doc]

What is "kingston" that you refer to?

Regards
Paul

A kingston usb to serial converter is my guess?

[zacksfoam]

Kingston is my flash drive [8GB] that I store my tunes on.Running the FTDI
uninstaller has error in file C:\windows\system32\ftcun2k.ini all of them
[4] have error in file and nothing changed ,plug in V2 USB Device Not Recognized pops up