when starting efi it says the usb drivers have to be installed or it wont work, connect the flashscan and restart efi. when i do this nothing happens.Originally Posted by joecar
when starting efi it says the usb drivers have to be installed or it wont work, connect the flashscan and restart efi. when i do this nothing happens.
Texas speed ls2 402, performabuilt 4l60e, 3600 stall,
Zex Nitrous kit, BMR Torque arm,BMR LCA'S, Relocation brackets.
best time all motor 11.8 with a 1.6 60' at 6800' DA.
Did you try this...?
yes when i go to that page i dont see any download on the right. the only download i see is on the top. when going there i dont see anything for drivers..
Texas speed ls2 402, performabuilt 4l60e, 3600 stall,
Zex Nitrous kit, BMR Torque arm,BMR LCA'S, Relocation brackets.
best time all motor 11.8 with a 1.6 60' at 6800' DA.
Try this one: http://download.efilive.com/Drivers/EFILive_2_02_04.zip
OK when I open this file do i ectract the windows vista? i just want to make sure i do this right.
Texas speed ls2 402, performabuilt 4l60e, 3600 stall,
Zex Nitrous kit, BMR Torque arm,BMR LCA'S, Relocation brackets.
best time all motor 11.8 with a 1.6 60' at 6800' DA.
I use WinXP...
Extract to C:\Program Files\EFILive\Drivers (this may be different on your system) and then when you follow the procedure for loading the driver, direct it to search that folder.
Or copy it to C:\Windows\System32 (but this would be different on your system).
crap i hate vista..
Texas speed ls2 402, performabuilt 4l60e, 3600 stall,
Zex Nitrous kit, BMR Torque arm,BMR LCA'S, Relocation brackets.
best time all motor 11.8 with a 1.6 60' at 6800' DA.
Did you disable UAC as suggested by Mr.Prick above...?
yep i sure did..it keeps giving me a security alert now..lol
Texas speed ls2 402, performabuilt 4l60e, 3600 stall,
Zex Nitrous kit, BMR Torque arm,BMR LCA'S, Relocation brackets.
best time all motor 11.8 with a 1.6 60' at 6800' DA.
If you are getting "security alerts" it sounds like you have turned UAC on, rather than off. Please ensure that UAC is disabled and restart your machine.
Disconnect all FlashScan interfaces from your laptop and then run the FTClean utility (C:\Program Files\EFILive\Drivers\Utilities\FTClean\FTClean.ex e). Select all the defaults to remove all FTDI drivers from your system.
Connect FlashScan to your PC. When prompted select the advanced driver installation option and browse to the 'C:\Program Files\EFILive\Drivers\EFILive\Win-2K-XP-Vista' folder when prompted.
If this doesn't work check this page on our website (http://www.efilive.com/index.php?opt...111&Itemid=121) to ensure the USB settings are correct. If your settings follow the instructions as described.
Andrew
EFILive Crew
Posting Permissions
Reply With Quote
