Results 1 to 9 of 9

Thread: Current Gear and Oil Temp

  1. #1
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default Current Gear and Oil Temp

    Oil Temp is not selectable. Would like to monitor this but how do you get it in? It's built into the factory cars so I would think you wouldn't need an external feed to monitor this.


    I searched around and found a txt formula for calculated box ratio that let me select it in v7.5 after entering it into calc_pids.txt, but how would I get that into b8.1 bbl?

    #Units Low High Fmt Expression
    #------------ ------------- ------------- ---- --------------------------------------------------------------
    *CLC-00-062
    None -4.0 4.0 .3 "{SAE.RPM} / {SAE.VSS.mph} / 336.135 / 3.29 * 24.86"

    #Code PRN SLOT Units System Description
    #------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------
    CALC.RATIO F062 CLC-00-062 "None" Calculated "Calculated Box Ratio"



    Thanks in advance, Ken . . .

  2. #2
    Lifetime Member
    Join Date
    Jan 2008
    Posts
    1,169

    Default

    Calc pids go in 7.5 for viewing after you log with BBL. that expression goes in the calc.pids.txt file.
    '07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that

    '06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
    Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor

    465hp/1008tq---7/25/09---Dyno Day Fast Specialties Tuning by ME

  3. #3
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default

    Quote Originally Posted by bballer182 View Post
    Calc pids go in 7.5 for viewing after you log with BBL. that expression goes in the calc.pids.txt file.
    Sure enough, the BBL session has the data after selecting the ratio PID. Data doesn't appear to be useful though. Often after shifing into second, the ratio still shows 1.xxx and 3rd still shows 2.xxx.

    Strange it doesn't have a built in way to log gears for a manual.

  4. #4
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default

    Anybody know how to get the Oil Temp logged??

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which vehicle/year/model...?

    For manual transmission, there is no way to know the current gear nor the ratio.

  6. #6
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default

    2001 Corvette Z06 , Manual

  7. #7
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    Quote Originally Posted by joecar View Post
    Which vehicle/year/model...?

    For manual transmission, there is no way to know the current gear nor the ratio.
    I am going to make a calculated PID for it...

    it shouldn't be too hard...

    mph/rpm = xx if whatever whatever output 1st 2nd 3rd... that is the logic...
    "All that is needed for the triumph of evil is that good men do nothing..."

  8. #8
    Member
    Join Date
    Sep 2007
    Posts
    95

    Default

    Quote Originally Posted by bballer182 View Post
    Calc pids go in 7.5 for viewing after you log with BBL. that expression goes in the calc.pids.txt file.
    Just trying to make sure I understand...
    Calc.pid's AREN'T Viewable in the V2 while BBL'ing? They are only viewable after the log has been made and saved and loaded into my laptop for later viewing?

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Jasondt2001 View Post
    Just trying to make sure I understand...
    Calc.pid's AREN'T Viewable in the V2 while BBL'ing? They are only viewable after the log has been made and saved and loaded into my laptop for later viewing?
    That is correct.

Similar Threads

  1. Does current BBL software work OK?
    By 02Z06 in forum FlashScan V2 BB Logging
    Replies: 0
    Last Post: August 15th, 2008, 10:14 AM
  2. V2 current usage?
    By Cougar281 in forum FlashScan V2
    Replies: 5
    Last Post: February 19th, 2008, 10:05 AM
  3. force motor current
    By 69camaro5speed in forum General
    Replies: 2
    Last Post: December 8th, 2006, 09:47 AM
  4. CarFax... Anyone have a current Account?
    By MN C5 in forum Lounge
    Replies: 1
    Last Post: November 13th, 2006, 02:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •