BBL Logging and PID Selections

[joecar]

If the chart shows lines thru pids, then those pids are not present in the log...

i.e. the charts have the wrong pids... change the pids on the charts (in each corner of each subchart rightclick and select pid from available pids);

the shipped samples all worked for me (I installed on a brand new MacBook (WinXP booted with Boot Camp);

support is thru the forum site;


goto the Data tab, do your logged pids show up, and do they have values...?

[joecar]

What OS are you using on your laptop...?

[kwhiteside]

Laptop is Vista Ultimate

Ok, lets take you sample file HoldenSs 0 to 100. when I do data tab only get 3 PID's CylAir and the two injectors, now I'm pretty sure that file is going to have Absolute Throttle and RPM, maybe VSS speed too, but none of them show up. This is the root of the problem. I load a file, and it randomly tells me the PIDS aren't available. I'll Post a couple screen shots for you

[kwhiteside]

So Fresh install after wiping directories and registry clean. Haven't touched any defaults. Simply started loading the samples to see if they would resolve.

See screens

[joecar]

I notified Paul, he will respond soon (allow for time zone difference).

[Blacky]

So Fresh install after wiping directories and registry clean. Haven't touched any defaults. Simply started loading the samples to see if they would resolve.

See screens

That screen display shows that the software and/or the log files are corrupt. Either the installation has failed (badly), or the file you downloaded from our web site has been corrupted.

Please try downloading the latest software (updated last night) and re-installing.
And/or I can mail you a CD with the latest software on it, send me your mailing address if you want the CD.

Regards
Paul

[kwhiteside]

sounds like a plan, I'll let you know a bit later if it works

[kwhiteside]

The upgrade seems to have magically fixed things up

[Blacky]

The upgrade seems to have magically fixed things up

Glad its sorted, I think something was wrong with the installation files you were using to install EFILive eralier.

Regards
Paul

[kwhiteside]

I can't believe it. It worked so well for two days. Opened up the same log file I've been looking at for two days tonight, and everything is missing. No TP, VSS, RPM, AFR, all gone!

Only thing I did was play with Calc_pids.txt earlier and add a couple of those pids into my dash. I made a copy of calc_pids before I tweaked it and have reset it back, but it makes no difference.

Any ideas?