Hey Guys,
When I log this pid, it comes up as PSI.
I should just be able to go into the tune tonight and change the properties to KPA and then the scanner will read in KPA right?
Thanks,
Glenn
Hey Guys,
When I log this pid, it comes up as PSI.
I should just be able to go into the tune tonight and change the properties to KPA and then the scanner will read in KPA right?
Thanks,
Glenn
Right click the PID and select metric for kPa.
You can toggle between the two units in the log as well.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
I did just that and it worked.
Thanks,
glenn