Results 1 to 10 of 10

Thread: lope idle

  1. #1
    New Member
    Join Date
    Jan 2008
    Posts
    7

    Default lope idle

    what can i do to make my LMM a lope idle like this
    http://www.youtube.com/watch?v=X15ik...rom=PL&index=4

    thanks
    2007.5 LMM CHEVROLET SILVERADO LTZ--CREW CAB SHORT BOX--aFe Stage II Air Intake--turbo back mbrp 4'' DPF delete t304---ppe blocker plate
    ppe tuner hot+2 race (300hp)--EFI Live--ppe cp3 dual fueler--ppe intercooler--ppe lift pump--ppe duramaximizer--pcv reroute--turbo garrett gt4094
    ats flexplate--ats 5 star torque converter--ppe stage 5 tranny--Mag Hytech trans pan and diff--
    trans. cooler---super damper---

  2. #2
    Junior Member
    Join Date
    Feb 2009
    Posts
    20

    Default

    curious about this as well

  3. #3
    Member
    Join Date
    Apr 2009
    Posts
    85

    Default

    go to pedal position to desired trq and change 0% at 600 rpm to like 425 and 800 rpm to -200 at 0% tps then in torque based fuel change the 600 rpm column all the way down to 600 ftlbs to 75 it will lope. on an LBZ anywayz i would think an lmm wouldnt be much diffrent but i dont know u can try it is all i gotta say good luck

  4. #4

    Default

    trying it tomorrow morning.... Let you know if I got it right...

  5. #5

    Default Avoid lope

    It's annoying.
    And it trips the ABS light. Set that part of the tune back and voila, no more ABS problems.
    This is probably something you guys aren't gonna like long term, but definitely sounds cool...

    Thanks for the info!

  6. #6
    Junior Member
    Join Date
    Jul 2009
    Posts
    17

    Default

    theres more info on this on duramaxforum.com ....its a pretty popular feature to add to a tune, but its bad on injectors from what I've read...I have heard it in person and it really does sound mean!! Havent tried it out on mine though...
    2006 cclb LBZ motor, banks intercooler, bd manifold, sb cold air, 4" straight pipe exhaust, resonator mod, transgo jr, edge insight monitor, EFI LIVE, Fabtech 6" lift, 18" rockstars on 35" toyo oc mt's

  7. #7

    Default

    I wouldn't run it again... I made a quick little video with that tune, lope-with turbo vanes left at 30% open between 600-800RPMs to get rid of the hiss during lope... Probably around 40HP increase over stock...

    http://www.facebook.com/video/video....v=135601786822
    If you guys can't get to the vid, I'll post it on youtube.
    Thanks again!

  8. #8
    Junior Member
    Join Date
    Oct 2009
    Posts
    10

    Default

    Is there a way to speed up or slow down the lope?

  9. #9
    Member
    Join Date
    Aug 2008
    Posts
    68

    Default

    Quote Originally Posted by terryr85 View Post
    Is there a way to speed up or slow down the lope?
    Good question, I'd like to know aswell

  10. #10
    Member
    Join Date
    Mar 2008
    Posts
    60

    Default

    You can but I can't find a happy median it fast or really slow. I'm going to play around with the timing sometime and see what that will do.
    06 GMC 2500 CCSB SLT LBZ 4X4

    These views expressed on this post are not my own, but rather randomly generated computer gibberish, and in no way should be used to judge the author's IQ or mental health.

Similar Threads

  1. Lope tune!
    By jcbduramax in forum General (Diesel)
    Replies: 5
    Last Post: July 8th, 2010, 01:46 AM
  2. Tuning In Lope
    By gpr in forum Gen III V8 Specific
    Replies: 18
    Last Post: September 29th, 2009, 02:04 PM
  3. Lope at Idle
    By tdfchevy in forum Duramax LB7
    Replies: 8
    Last Post: February 28th, 2009, 07:47 PM
  4. lope idle?
    By FH Leader in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: February 18th, 2009, 11:15 AM
  5. Car Wont Idle And Runs Rich At Idle ( Tune Inside)
    By mikeyayell in forum Gen III V8 Specific
    Replies: 13
    Last Post: January 8th, 2008, 04:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •