Results 1 to 8 of 8

Thread: Need another ODB2 cable

  1. #1
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default Need another ODB2 cable

    Ran mine through the dash inside the console and a buddy wants me to mil out a couple codes for him. Don't want to tear console apart again. I would rather get an extra cable. I see this cable all over the place for about $13

    J1962M RA to RJ45, 6ft compatible with ScanGaugeII

    However, the Flashscan store states the shipping cable is J1962A instead of the M version that I find everywhere.

    Does this matter? Link to a known good cable?

    Ken . . .
    2001 Corvette Z06

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    You should buy direct FlashScan V2 OBDII Cable
    to be sure of the wiring, unless you have the proper crimping tool to re-wire
    another cable in case it does not match.
    For the wiring schematic see the Bench Harness Tutorial.pdf
    in C:\Program Files\EFILive\V7.5\Doc\Tutorials
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default

    Went to buy just what you recommended. $19 for cable, $41.63 for shipping, that isn't going to happen.

    How about a place to get a space cable at a sensable price.
    2001 Corvette Z06

  4. #4
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default

    http://www.obd2cables.com/products/c...angaugeii.html

    Would this work. I've got no problem putting EFILive as the first place to buy, but because they are in antartica, the shipping is a tad high. I'm sure they understand this. How about a link to an american distributor or tuner that resells their stuff?
    2001 Corvette Z06

  5. #5
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    It won't work, you can re-pin it if you are inclined.
    I never thought about where the part come from when ordering direct,
    but I imagine that they have a US warehouse.
    Try one of these guys Resellers - United States
    Fish Tuning is probably your best bet.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Try Ira.

  7. #7
    Senior Member
    Join Date
    Mar 2007
    Posts
    140

    Default

    Another vote for IRA at Fish Tuning. He has extra cables.

  8. #8
    Junior Member OLS108's Avatar
    Join Date
    Nov 2007
    Posts
    39

    Default

    Anyone in Australia have them for a good price ? shipping is $31US to Brisbane.
    I can arrange for it too be picked up in Aust

Similar Threads

  1. Need new OBD cable for V2
    By Beer99C5 in forum FlashScan V2
    Replies: 3
    Last Post: January 22nd, 2010, 12:36 PM
  2. why do I have a com cable and what to do now?
    By C5Vette in forum FlashScan V2
    Replies: 0
    Last Post: July 4th, 2008, 10:14 AM
  3. Can a V1 cable log a ls2?
    By BlackGMC in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: January 7th, 2008, 01:58 PM
  4. Cable
    By Stingray in forum General
    Replies: 2
    Last Post: August 20th, 2005, 12:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •