Results 1 to 3 of 3

Thread: Logworks and {B3601}

  1. #1
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default Logworks and {B3601}

    {B3601} is 14.628573 AFR (stock)
    Logworks gasoline setting is 14.7

    EFILive will not save @ 14.7 and
    Logworks will not save @ 14.628573
    precision is .1 either 14.6 or 14.7

    My question is does it matter if these match perfectly or not?
    I believe that because these settings are not programmed to the LC-1
    it does not matter, especially when using serial connection.

    I have always had Logworks set to gas (14.7) but diesel (14.6) is closer to
    the value {B3601} will save.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,010

    Default

    My idea is to use serial Lambda and create an appropriate ben calc pid for it (something like GM.EQIVRATIO * EXT.WO2LAM1... did I get that right...?)... I haven't tried this yet, my LC-1 is off my car at the moment.

  3. #3
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Depending on where you look Stoich for gasoline is 14.6 or 14.7
    but it does not matter with serial connection because the fuel settings
    do not change how the LC-1 interpolates data from the sensor,
    just how it's displayed through Logworks.

    1 EQ does not have to be equal to 1 Lambda. (whatever it is)

    BTW I made a PID for External Wideband EQ
    "({B3601}/{EXT.WO2AFR1})"
    Commanded EQ is "({B3601}/{GM.AFR})"
    Last edited by mr.prick; June 28th, 2009 at 05:36 PM.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

Similar Threads

  1. B3601 value for E10
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 32
    Last Post: August 27th, 2015, 11:09 PM
  2. B3601 and returning to CL
    By Gregs in forum Gen III V8 Specific
    Replies: 7
    Last Post: April 30th, 2010, 11:48 PM
  3. Commanded AFR ≠ {B3601}
    By mr.prick in forum Gen III V8 Specific
    Replies: 22
    Last Post: March 21st, 2010, 10:33 AM
  4. B3601 equivalent in E38
    By Chalky in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: September 7th, 2009, 11:02 PM
  5. B3601
    By johnv in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: November 23rd, 2005, 10:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •