Page 22 of 22 FirstFirst ... 12202122
Results 211 to 220 of 220

Thread: Interesting info on B3702 Injection timing

  1. #211
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    I think I can handle that.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  2. #212
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Interesting... we'll see what B3703 does.

  3. #213
    Member
    Join Date
    May 2006
    Posts
    97

    Default

    Going to play with the calculators when some decent weather breaks. My cam has a good amount of overlap, so I guess I should see a change.

  4. #214
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    Got some data yesterday, but I goofed and logged LTFTs with and without cam sensor, didn't change the value at all. Will re-engage tomorrow and add STFTs as I ASSume you were after those as well. Fair warning, after yesterday's logs truck isn't looking so hot. Left side ran lean and stayed that way, right side didn't alternate enough so take it for what it's worth.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  5. #215
    Lifetime Member
    Join Date
    Aug 2013
    Posts
    735

    Default

    Yeah, we will need STFTs as well. If it does change anything, the change might be small and only show up on STFTs.

    If the left side is significantly lean, you should probably investigate that before worrying about this experiment.

  6. #216
    Lifetime Member
    Join Date
    Mar 2009
    Posts
    746

    Default

    Wideband lives in the left bank and showed 15-16:1, truck got weird after I corrected CMPRET and did a CASE relearn. It's been getting quirky lately, there's definitely a mechanical issue waiting to be discovered. I really didn't expect the effect to be so significant, the root cause is buried deeper than just a bad O2.
    1998 GMC Sierra K1500 5.7/4L80E, longtubes, 411 w/COS 5, marine cam/intake, Whipple. 91 octane at 6000'.
    1997 GMC Sierra K3500 7.4/4L80E, 411 w/COS 3, Whipple, small cam.
    2004 Corvette Z06 with longtubes.

  7. #217
    Member
    Join Date
    Oct 2005
    Posts
    86

    Default resolution/sampling rate

    By utilizing the 2 external inputs of my V1, or with the converted EGR and A/C inputs. Could monitor camshaft, crankshaft sensors as well #1 spark and #1 injector. Does the scanner support enough resolution to get something useful? What is the sampling rate? Kind of like picoscope output.
    Last edited by voda1; April 3rd, 2019 at 06:41 AM.
    97 Vette 6spd, CamMotion Titan2 LS1 cam, TSP 5.3 StageII heads, Vararam intake, Z06 manifold, ARH headers/cats, Z06 catback, Monster Stage2 clutch, 04 Z06 pcv, new style knock sensor(late98 to 04).

    Using FlashScan V1 with NGK-AFX Wide band

  8. #218
    Member
    Join Date
    Oct 2005
    Posts
    86

    Default Boundry value FYI

    When opening a stock 97C5 tune file in hptuners the boundry value is shown and quite different from later values.
    7.22 boundry and 4.78 normal(B3702)

    Click image for larger version. 

Name:	hpInjBoundry97C5stk.JPG 
Views:	275 
Size:	42.6 KB 
ID:	22741
    97 Vette 6spd, CamMotion Titan2 LS1 cam, TSP 5.3 StageII heads, Vararam intake, Z06 manifold, ARH headers/cats, Z06 catback, Monster Stage2 clutch, 04 Z06 pcv, new style knock sensor(late98 to 04).

    Using FlashScan V1 with NGK-AFX Wide band

  9. #219
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Scantool logs pids at 10Hz for LS1A/LS1B/P01 and 40 Hz for E38/E67.

  10. #220
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    1997/8 LS1's do have various differences compared to later LS1's.

Page 22 of 22 FirstFirst ... 12202122

Similar Threads

  1. Injection Timing / Pilot
    By Lennart in forum General (Diesel)
    Replies: 6
    Last Post: January 20th, 2012, 02:05 AM
  2. injection timing after pilot c,d?
    By SGFastMax in forum Duramax LB7
    Replies: 0
    Last Post: February 3rd, 2010, 02:35 PM
  3. injector Timing {B3702}.... when to tune?
    By Goldfinger911 in forum Gen III V8 Specific
    Replies: 24
    Last Post: February 22nd, 2009, 07:10 PM
  4. Injection Timing During Cranking
    By thetallengineer in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: April 7th, 2007, 02:48 AM
  5. injection timing
    By 02gmcwaldoch in forum General (Diesel)
    Replies: 7
    Last Post: March 18th, 2006, 06:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •