2002 8.1L

[94SS]

Is this supported with the newer versions of the scan tool I can connect but don't have the ability to do anything with the scan tool once I am connected.

[SinisterSS]

Yes, your 2002 8.1L is supported. Sounds like you may have a licensing issue. Have you entered your information off the "blue card" correctly?

[94SS]

I just updated from my version 5 and did the copy paste in the liscense field it connects to F-body's without a problem.

[Blacky]

Does it connect to the 8.1?
If so, is the red "log data" button on the toolbar at the bottom of the window enabled? (i.e. not grayed out)
If so, click on the red "log data" button.

If you get to a point where you can't go any further, press Ctrl+G (Or select menu option File->Generate error report, and save the error report and email it to me at paul@efilive.com

Regards
Paul

[94SS]

E-Mail sent.

[Blacky]

E-Mail sent.

Got it thanks.
Paul

[airflowdevelop]

Paul,
When you figure out whats going on, LET ME KNOW! I installed the newest pre-release like we talked and I am still having the same problems.. although this is a late 05. The 05's and 02's are the only ones I have trouble with.

Thanks
Dennis
Air Flow Development
717-887-4666

[Blacky]

E-Mail sent.

Got it thanks.
Paul

Looks like it is not recognising the cable as a registered cable. Do you have more than one cable? Strange that it connects to F Bodies and not the truck.

When you try to connect have you checked for any messages in the [Console (F12)] tab page? If there are any messages that indicate a problem, please copy/past that info to me via email at paul@efilive.com

Thanks.
Paul

[airflowdevelop]

any new developments on this problem?

Thanks
Dennis

[Blacky]

any new developments on this problem?

Thanks
Dennis

Feel free to send me the same info I asked of 94SS.
Paul