Results 1 to 7 of 7

Thread: Can't select RAFIG PID's in either BBL or Scan tool!

  1. #1
    Senior Member
    Join Date
    Apr 2009
    Posts
    197

    Default Can't select RAFIG PID's in either BBL or Scan tool!

    In BBL v8 I try to setup to log IAC_SDAC_M and IAC_LPNAC_M. When I start logging I get description errors stating those those pids are not available, please deselect. Show stopper there.

    If I plug my laptop in and try to select any IAC_ pid they are all unavailable. When I select more info, they are not reliant on any other PID's. Stuck again.

    What's the trick to log the RAFIG PID's for a GenIII Z06?
    2001 Corvette Z06

  2. #2
    Senior Member
    Join Date
    Jun 2005
    Posts
    126

    Default

    Having this same issue lately with the most recent update 7.5, using passthrew I cannot select these pids. Any ideas?

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    VB2K, are you running the same OS as KW...?

  4. #4
    Senior Member
    Join Date
    Jun 2005
    Posts
    126

    Default

    The car I am tuning right now is a 99 OS 12593359 V 7.5.5 Build 88

    However a car 2 weeks ago a 2004 OS 12587603 the RAFIG Pids weren't working either.

    They were working last time I remember though, however the auto updates i accepted and not sure what the last build was before when they did work.

  5. #5
    Senior Member
    Join Date
    Jun 2005
    Posts
    126

    Default

    To clarify, I am using the same RAFIG Pid list that I always have in the past which has worked just fine.

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    12587603 should be working fine as the idle PID's are in the gm_enhanced file (this is for laptop based logging), for the earlier 99 OS, they were never defined for it.
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    EFILive Distributor dfe1's Avatar
    Join Date
    Jan 2005
    Posts
    837

    Default

    Don't know what the problem is-- RAFIG works fine for me. Something you might want to consider-- RAFIG stands for Running Air Flow In Gear. Could it be you're trying to monitor air flow while the trans is in Neutral????
    DigitalEFI- EFILive US Distributor
    sales@digitalefi.com
    678/344-1590

Similar Threads

  1. Tuning tool not following scan tool (VE table)
    By dvx in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 19th, 2008, 08:43 AM
  2. Scan tool match tune tool?
    By zapp168 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 20th, 2008, 04:27 AM
  3. Replies: 4
    Last Post: January 6th, 2008, 10:47 AM
  4. RAFIG issues, scan tool doesnt track correctly
    By eurospec1 in forum Gen III V8 Specific
    Replies: 0
    Last Post: October 13th, 2007, 01:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •