Page 13 in the AutoVE Tuning guide.

[Chevy366]

No , no , don't smooth , bumpy VE is fine , leave it as it logs .
Smoothing VE is not necessary and may in fact hurt it .

[joecar]

If you do smooth, take another log and see if the same peaks/valleys reappear.

[waterbug1999]

If you are using the LTFT method use the 2 filters on the Main VE then copy the Main VE to the Back up VE.

I have not done anything to the LTFT's... I yanked the MAF out yesterday and re-logged due to more airflow. After I loaded up the new tune I took it for a spin and logged some data.
I noticed I was lean up top (you can see it in my log) and was wondering the best/easiest way to richen it up. Since its a SD tune im going to need to know this.

[mr.prick]

OL or CL, for CL you have the filter(s) for OL just use the filter from the AutoVE tutorial.

[waterbug1999]

OL or CL, for CL you have the filter(s) for OL just use the filter from the AutoVE tutorial.

i mean under WOT.