Results 1 to 5 of 5

Thread: Bosch-Suggestion for continuity-cal_link

  1. #1
    Lifetime Member killerbee's Avatar
    Join Date
    Jan 2006
    Posts
    1,079

    Default Bosch-Suggestion for continuity-cal_link

    In reviewing logs for several weeks now, something needs a change.

    The logs make pretty good sense. However, as you go from B1115 to B1102, the cursor for torque is in the wrong place.

    The final fuel value in the logs, IS correct.

    The GM.ENGTRQREF DMA is not representative of "desired torque". I am not sure of the origin of this pid. We need something that translates the (desired torque) value derived from B1115. Is there something else that can be put in place of this torque pid in cal_link to make log readbacks integral for torque?

    Here is a WOT example where i have defined 627 as 100% TP desired torque, shown in blue. That value, 82mm is, in fact, the fuel delivered, and the torque pid is highlighting an incorrect value.

    Throttle pids are NOT part of the problem. Thanks.

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ScreenShot.jpg 
Views:	542 
Size:	44.1 KB 
ID:	5910  
    Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
    Custom Tuning Services
    DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
    EFILive's first VGT "Software Wastegate Tune"

  2. #2
    Lifetime Member killerbee's Avatar
    Join Date
    Jan 2006
    Posts
    1,079

    Default

    ??? bump
    Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
    Custom Tuning Services
    DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
    EFILive's first VGT "Software Wastegate Tune"

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    It may very well be that torque PID is not the reference for those tables, oh joy! more DMA PID's.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Lifetime Member killerbee's Avatar
    Join Date
    Jan 2006
    Posts
    1,079

    Default

    Looking forward to when my eyes stop glazing over from trying to roughly translate in my head. But I will guess you have eye glaze perfected by now.
    Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
    Custom Tuning Services
    DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
    EFILive's first VGT "Software Wastegate Tune"

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Actually, as much as I criticise the Bosch ECM code it's pretty good (who am I to judge anyway!), it's just hard to decipher from a hackers point. Though the more I work with it the easier it becomes, and I've even picked up a few neat PowerPC programming ideas from looking at the way they do things.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. Cal_Link
    By Big D in forum LL8 4.2L In-Line 6 - P10 PCM
    Replies: 3
    Last Post: November 28th, 2009, 09:47 PM
  2. Upto date Cal_link file
    By hquick in forum RoadRunner Real-Time PCM Emulator
    Replies: 8
    Last Post: June 24th, 2008, 04:33 PM
  3. cal_link advise
    By mr.prick in forum RoadRunner Real-Time PCM Emulator
    Replies: 12
    Last Post: November 1st, 2007, 01:58 PM
  4. Bosch ECM controller i.d.
    By forcefedjunkie in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: June 11th, 2007, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •