Page 16 of 16 FirstFirst ... 6141516
Results 151 to 158 of 158

Thread: Correct IFR tables for LS3/LS7 injectors in Gen III

  1. #151
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by dian View Post
    on second thought, i have no idea what the labels are on the l96. i thought thay were hektopascals. just curious.
    I'm not sure what you mean...?

    The axis is on kPa...

    post a screenshot of what you're seeing.

    ~ posted by phone ~
    Last edited by joecar; June 21st, 2017 at 05:30 AM. Reason: grammar

  2. #152
    Senior Member
    Join Date
    Nov 2014
    Posts
    192

    Default

    under l96 i see labels from 128 to 768. the values in the tables are different. but i probably misunderstend something.

  3. #153
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Whipped383 View Post
    Attachment 20465

    This appears to be the correct file for the injectors in question
    Quote Originally Posted by dian View Post
    under l96 i see labels from 128 to 768. the values in the tables are different. but i probably misunderstend something.
    In the tune file attached to post #132 above, the axis of table B4001 has those labels.

    Those labels are injector pressure delta (difference from top to bottom of injector) in kPa.

  4. #154
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    So if rail pressure measures 400 kPa (58 psi) (i.e. gauge pressure is 400 kPa, so absolute pressure is 500 kPa)

    then injector pressure delta = 500 - MAP

    so then the usable range of the axis on B4001 are as follows:

    • NA: 408 to 468 kPa (400 kPa has to be interpolated by ECM)
    • 1-bar boost: 308 to 468 kPa
    • 2-bar boost: 208 to 468 kPa

  5. #155
    Junior Member spedracr93's Avatar
    Join Date
    Jun 2016
    Posts
    43

    Default

    Quote Originally Posted by joecar View Post
    In the spreadsheets, the LS1B paste-able tables are labelled.
    The tables in these spreadsheets are great, but don't the numbers only work if the Fuel Rail Pressure is 58 psi?

    Is there a conversion possible to use LS3 injector data at a different Fuel Rail Pressure? Say... 44 psi?

  6. #156
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yes 58 psi.

    You can scale the IFR table using by multiplying by sqrt(44/58).

  7. #157
    Junior Member spedracr93's Avatar
    Join Date
    Jun 2016
    Posts
    43

    Default

    Quote Originally Posted by joecar View Post
    Yes 58 psi.

    You can scale the IFR table using by multiplying by sqrt(44/58).
    That makes a large difference. Thanks for the formula!

    58 to 44 is a 12.9% difference.

    Can rail pressure affect Minimum Injector Pulse Width? I realize it's a measure of opening time, but it seems like the volume injected at a lower pressure would be less within that time and a compensation could be to modify that minimum time.

  8. #158
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by spedracr93 View Post
    That makes a large difference. Thanks for the formula!

    58 to 44 is a 12.9% difference.
    Yes, scales by 0.871.

    Can rail pressure affect Minimum Injector Pulse Width? I realize it's a measure of opening time, but it seems like the volume injected at a lower pressure would be less within that time and a compensation could be to modify that minimum time.
    It can... I don't know how to calculate the new minimum.

Page 16 of 16 FirstFirst ... 6141516

Similar Threads

  1. Correct injectors fixed my issues
    By hquick in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: May 27th, 2009, 02:12 AM
  2. How to correct WOT for each gear?
    By PRAY in forum Gen III V8 Specific
    Replies: 5
    Last Post: June 9th, 2008, 08:00 AM
  3. Is this map correct?
    By Loudmouth LS1 in forum Gen III V8 Specific
    Replies: 5
    Last Post: January 19th, 2007, 01:22 PM
  4. 96lb/hr injectors can be run like stock injectors with EFILIVE!!
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: July 24th, 2006, 02:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •