Tuning a 2001 z need help

[kistlerjm9]

When I log my misfire count current on all cylinders is 20 history 5100 but it doesnt continue to count it just stays right there! Also as soon as I start the car I kick a p0103 maf high code and I swapped mafs with my 2000 and got the same code! And no matter what I do I cant get rid of 1.8 KR as soon as you start the car! All that is done to the car is a torquer v2 cam, 3000 stall, pacesetters, ect no heads? Attached is a copy of my tune please take a look and see what i screwed up this is driving me crazy! Thanks in advance! When I had it on a stock tune it didnt kick the p0103 code for the maf and now it is! I triple checked to make sure I turned everything back on after autove and maf!

[5.7ute]

C2901 & C2903 are still set to fail the maf. Set these back to stock.
FWIW misfire detection doesnt work when the maf is failed.

[kistlerjm9]

wow i am a jackass!!!!!!! thank you man i owe you a beer!

[5.7ute]

wow i am a jackass!!!!!!! thank you man i owe you a beer!

No worries, I'll take a middie

[waterbug1999]

I saw your post on LS1Tech... Im not an expert but it looks like your still in OLSD.

You still have B3313 set at 122*c, B3801 disabled, B4205 set at 140*c,

[kistlerjm9]

hey guys im sorry helps if i put the right tune in the car! i just needed to take a step back. what a bunch of wasted time cause im a moron......... thanks for the replies

[waterbug1999]

I was doing the same thing about 3 weeks ago.. I know it can get confusing with all the tunes all over the lap top, lol.

I ended up yanking my MAF and leaving it in OLSD, so far i like it better this way.

[joecar]

Live and Learn... it's all part of the learning process, we've all made dumb mistakes (and I still do...).