Results 1 to 5 of 5

Thread: GENIII 4wd to 2wd conversion

  1. #1
    Junior Member
    Join Date
    May 2006
    Posts
    16

    Default GENIII 4wd to 2wd conversion

    I went from a 4wd 4l60e to a 2wd 4l80e. I removed the tcscm to shut off the light on the dash. Now when I scan for dtc's I get an error saying that there was no response from the tcscm. How do I get it to no longer search for that module?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Goto Edit->Properties->Advanced and uncheck the box for Check/Clear DTCs for All Modules.

    And welcome to the forum...

  3. #3
    Junior Member
    Join Date
    May 2006
    Posts
    16

    Default

    Great thank you. So there is no problem with it expecting it and it not being there?

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    If you uncheck that box, then the scantool will only check the PCM.

  5. #5
    Junior Member
    Join Date
    May 2006
    Posts
    16

    Default

    Awesome. Thanks much man.

Similar Threads

  1. vz ls1 to l98 conversion
    By shane in forum Gen III V8 Specific
    Replies: 1
    Last Post: November 30th, 2008, 10:41 PM
  2. New L92 427 w/625hp is cheaper than messing w/5.7liter GenIII
    By 98 tigershark in forum Gen III V8 Specific
    Replies: 3
    Last Post: November 23rd, 2007, 11:17 PM
  3. How many RPM is safe for a genIII truck engine?
    By Wasted Income in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: February 18th, 2006, 03:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •