Results 1 to 10 of 30

Thread: Cold AFR doesn't follow commanded AFR

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member
    Join Date
    May 2008
    Posts
    389

    Default Cold AFR doesn't follow commanded AFR

    I was wondering what causes the WBO2 AFR to not match the commanded AFR when you start the vehicle cold? I have 3 cars I've done now and all 3 are the same.

    I attached a log of the firebird, you can see that they are not even close. Any ideas where I could look?

    Lee
    Attached Files Attached Files

    230" Dragster - 2000 LS1, 02020003 Speed Density, PRC 2.5 Heads,
    MS3 Cam 237/242 .603/.609, Vic Jr. intake, Holley 1000CFM TB,
    PowerGlide, 5000 stall converter. 8.70@154 MPH

    My Projects Homepage: http://www.horsepowerracing.com

Similar Threads

  1. My AutoVE doesn't look right??
    By Mr. P. in forum Gen III V8 Specific
    Replies: 5
    Last Post: December 2nd, 2009, 06:01 AM
  2. LOG doesn't get written IF car shuts down first
    By Highlander in forum FlashScan V2 BB Logging
    Replies: 13
    Last Post: May 6th, 2009, 04:00 AM
  3. LC-1 doesn't work pass though
    By samh_08 in forum FlashScan V2
    Replies: 5
    Last Post: April 19th, 2009, 07:53 AM
  4. searching doesn't like me much... 2.73's to 3.42's
    By Koncrete in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: January 22nd, 2007, 05:56 AM
  5. Why doesn't SAE.MAP not work? (2-bar)
    By Alvin in forum Custom Operating Systems
    Replies: 2
    Last Post: October 27th, 2006, 05:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •