What’s the best approach and tables to adjust knock sensors for an LS2 engine with Vortech blower running the LS1 knock sensors and computer (sensors on side of block)

We are getting knock on both the dyno sensor and det cans but its not showing on the scan tool K/R, we have been playing around with lower values in both B6244 (knock sensor multiplier A) and B6245 (knock senor multiplier B) but would just like to know if any one has made similar adjustments or used other tables to increase knock sensor sensitivity.

It’s a non intercooler blower so with the large swings in intake temp expected we really need the knock sensors working well as a safety back up.