PLX>Flashscan V2 install

[-=Mod=-]

I've looked everywhere on how to install a PLX SM-AFR to V2 but cannot find anything as far as wiring goes.
I've tried to register at PLX forums and each time I get php error codes.

What wires go from where to where from the PLX to the V2?

Thanks for any and all help.

This does not help
http://forum.efilive.com/showthread.php?t=81

[mr.prick]

I wouldn't think that thread would help,
it's about 2 years older than the V2.

If you want serial WBO2 connection you will need to do some hacking
PLX SM-AFR Serial upgrade

[-=Mod=-]

Not a big fan of soldering into a part I just paid $200 for.
There are so many people out there using PLX. There has to be an easy way to hook this thing up.

[joecar]

If you want serial AFR (recommended), then follow Mr.Prick's link.

Otherwise if you want analog AFR, connect the PLX's analog signal output to FlashScan's AD1+ input and the PLX's signal ground to FlashScan's AD1- input.

[-=Mod=-]

I'm a visual person.
Would this be correct doing an analog setup?

[joecar]

Yes that is correct (the red and black ones).

[-=Mod=-]

Thank you