Results 1 to 4 of 4

Thread: Got the aem w02 pid working but ben has error message

  1. #1
    Junior Member
    Join Date
    Apr 2008
    Posts
    30

    Default Got the aem w02 pid working but ben has error message

    Im trying to use the autove but my ben is saying its vlaid but the following error will occur: pid value cannot be determined because divide by zero. what the hell does that mean and how do i fix it? any ideas?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post your log file.

    Which software build version do you have...?

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    The BEN factors are calculated by dividing the actual AFR by the commanded AFR.
    If the commanded AFR is 0 then the BEN factor cannot be computed because a divide by zero error would occur. You can't divide any number by zero, the result is undefined.

    The reasons the commanded AFR could be zero are:
    1. You have no logged data in the Scan Tool software (try logging some data or loading a log file).
    2. The commanded AFR is actually zero - although that is unlikely.

    Regards
    Paul
    Before asking for help, please read this.

  4. #4
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    It may need to be reformatted,
    post the sections of the calc.pids.txt it is on.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

Similar Threads

  1. Error message?
    By nathans1987 in forum Custom Operating Systems
    Replies: 10
    Last Post: September 2nd, 2009, 01:04 PM
  2. Error Message when trying to update
    By MN C5 in forum FlashScan V2
    Replies: 4
    Last Post: April 5th, 2009, 11:07 AM
  3. Error message formatting....
    By Lennart in forum FlashScan V2 BB Logging
    Replies: 3
    Last Post: March 27th, 2008, 10:34 PM
  4. Error message
    By Chevy366 in forum General (Petrol, Gas, Ethanol)
    Replies: 17
    Last Post: October 20th, 2007, 09:48 AM
  5. Error Message
    By TNRGreene in forum General (Diesel)
    Replies: 7
    Last Post: June 13th, 2007, 10:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •