Results 1 to 3 of 3

Thread: E38 Cooling fans question

  1. #1
    Lifetime Member Chalky's Avatar
    Join Date
    Sep 2003
    Posts
    617

    Default E38 Cooling fans question

    I am familiar with C5 ecm and cooling fans settings. With the E38, I am a bit confused with fan settings. G0901 shows fan power increasing as ect rise maxing out @ 89.9%

    (G0922) 266.000000 Fan after run hi temp upper
    (G0923) 262.400000 Fan after run hi temp lower
    (G0924) 235.400000 Fan after run temp upper
    (G0925) 235.400000 Fan after run temp lower
    (0926) 30.000000 Fan after run max time

    With fans coming online @ 199*, not sure I understand how fans works with above tables/
    2015 Z06 A8

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    You need to play with table G0901.
    Depending on your fan types (normal on/off or PWM) this will control either the fan relay switching temps or the speed of the fans.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member Chalky's Avatar
    Join Date
    Sep 2003
    Posts
    617

    Default

    Can I assume the low fan comes on @ 199* and ramps up per the table? At some point, fan #2 will come on line or do both fans come online together increasing power as temps rise?
    2015 Z06 A8

Similar Threads

  1. E38 pwm cooling fan control
    By vette5797 in forum Conversions / Aftermarket Parts
    Replies: 1
    Last Post: December 24th, 2009, 04:07 AM
  2. tuning out fans
    By cajundragger in forum Gen III V8 Specific
    Replies: 5
    Last Post: December 24th, 2008, 07:38 PM
  3. Well guys I'm baaaaaaaaaaaaaack!!! Cooling fan OS problems.
    By ssvolvo in forum Gen IV V8 Specific
    Replies: 8
    Last Post: May 1st, 2008, 09:21 PM
  4. COS for E40 and fans
    By Alvin in forum Custom Operating Systems
    Replies: 5
    Last Post: February 18th, 2007, 08:10 PM
  5. Burping the LS1 cooling system (questions)
    By joecar in forum Lounge
    Replies: 9
    Last Post: November 21st, 2006, 06:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •