Results 1 to 2 of 2

Thread: lc1 wideband output ?

  1. #1
    Lifetime Member smslyguy's Avatar
    Join Date
    Oct 2008
    Posts
    278

    Default lc1 wideband output ?

    on the lc1 wideband it has two outputs. output 1 to simulate a narrow band and output 2 for running a gauge. In the efi live manuals it state to hooked output 1 to a dyno tune and output 2 to efi live.

    I have hooked up output 1 to the pcm. My question is can i hook up output 2 to efi live tunes and program it to run with efi or can you only use output 1 with efi live tunes?
    2001 camaro z28 ss vert with factory slp upgrades, Hooker long tubes, 3"y-pipe to a 4" muffler, ,airlid,s.s.r.a. ,t.c.bypass,descreened m.a.f. 232/234 .595,.598 +2 comp cam with ported and polished stock heads with .650 lift dual springs and a bowl grind. tuned with EFI Live. All combined to achieve 29 m.p.g. and 399 r.w.h.p. with 384 lbs of torque. sold...

    Now own a 2015 1LE camaro

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    The outputs come pre-programmed,
    #2 connects to Flashscan without needing to be re-programmed.
    #1 will not work properly with the pre-defined LC-1 PIDs unless you re-program it.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

Similar Threads

  1. How to match wideband output to {B3601}
    By mr.prick in forum Tutorials
    Replies: 1
    Last Post: September 20th, 2010, 05:46 AM
  2. Any way to dampen the PLX wideband output?
    By lsx523 in forum Gen III V8 Specific
    Replies: 4
    Last Post: February 1st, 2010, 06:58 AM
  3. DSP Output changes
    By GMPX in forum Duramax LB7
    Replies: 5
    Last Post: November 12th, 2009, 12:43 PM
  4. E38 VSS output
    By harascho in forum E37, E38 & E67 PFI ECM's
    Replies: 0
    Last Post: June 29th, 2009, 06:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •