What PIDS should I select?

[LM7Tuner]

What PID's should I select other than the basics for your dash(VSS, RPM, ECT, Spark, Fuel Trim, AFR, Knock Retard, IAT, Throttle, MAP, MAF, Fuel Trim, Injector Duty Cycle, Fuel Status,) for tuning purposes? This will be for a all around engine and transmission tune.

[joecar]

RPM
AFR
DYNCYLAIR_DMA or DYNCYLAIR
DYNAIR
MAF
MAFFREQ
MAP
TP
ECT
IAT
LONGFT1 and 2
SPARKAVD
KR
GEAR
TCCMODE
TFMPRS
VSS


Serial wideband:
WBO2AFR1 or 2
BEN1 or 2


Analog wideband:
AD1 or 2
AFR_xxx1 or 2 (xxx = your wideband model)
BEN_xxx1 or 2


Make sure pid channel count does not go over 24 (otherwise your sample rate will go down).

[LM7Tuner]

SAE.MAF or GM.MAF

[LM7Tuner]

GM.TP or SAE.TP

[joecar]

SAE.TP

Same as tables D0901,2,3,6,7,8.

[LM7Tuner]

Ok thanks.