Results 1 to 4 of 4

Thread: Innovate LM-1 wideband hook-up

  1. #1
    Junior Member 01Z's Avatar
    Join Date
    Jan 2008
    Posts
    38

    Default Innovate LM-1 wideband hook-up

    Please correct and add instructions if you can.

    I'm connecting the LM-1 #2 analog wire (white) to the FlashScan AD1.

    I've selected two PIDs; they are as follows:

    External Analog Voltage 1 AD1
    Base Efficiency Numerator 2 - LM-1 {CALC.BEN_LM12}

    I have the WB sensor in bank #2 but should I use Numerator 1 instead??

    Finally, what gauge should I use on the dashboard and is there anything else I need to do - any other PIDs to include?
    2001 Chevrolet Camaro Z28 - GM LS6 H/C
    EFILive FlashScan V1 - 7.5.6 (Build 133)

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    The #2 PIDs are for dual WBO2s , bank1 and bank2
    You can use them instead of the #1 PIDs but make sure the #s match. (AFR1 & BEN1 ect.)
    You will need to select GM.AFR & CALC.AFR_LM11 or CALC.AFR_LM12
    for BEN1 or BEN2 to be valid.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Like mr.prick said, the BEN numerator refers to the AD channel number regardless of bank number...

    e.g.
    BEN1 <-- AD1
    BEN2 <-- AD2

  4. #4
    Junior Member 01Z's Avatar
    Join Date
    Jan 2008
    Posts
    38

    Default

    Okay thanks! I'll see what and how the data gets displayed when the time comes I guess. It should make more sense when I see it.

Similar Threads

  1. How to hook up AEM wideband to interface? help
    By mvvette97 in forum Gen III V8 Specific
    Replies: 0
    Last Post: October 11th, 2008, 05:16 AM
  2. lc-1 to v2 hook up
    By W_D_R in forum General (Petrol, Gas, Ethanol)
    Replies: 23
    Last Post: March 31st, 2008, 02:42 PM
  3. LC1 hook-up/installation
    By SPRAYED07 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: July 8th, 2007, 06:36 AM
  4. lc-1 WB hook up to old O2 wiring?
    By killaz in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: June 14th, 2006, 02:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •