Results 1 to 10 of 10

Thread: 2003+ pcm

  1. #1
    Senior Member
    Join Date
    Mar 2007
    Posts
    175

    Default 2003+ pcm

    Hi guys, can someone where to find the pin outs for the 2003+ 1mb (with the green plug).

    Cheers Mike

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    570

    Default

    PM me your email address

  3. #3
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    LS1_1MB.zip
    I can't remember where I got this or if it is vehicle specific.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  4. #4
    Senior Member
    Join Date
    Mar 2007
    Posts
    175

    Default

    Thanks guys, email sent as well in case there are differences.
    I am trying to get the 1mb PCM to work with cable throttle body but am having trouble with the TPS registering, When I hook up the 512 PCM it reads but not when the 1mb PCM is connected, so I was wondering if the pin location was the same???
    I dont see it on the diag from mr.prick

    Mike

  5. #5
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Comparing a 516k & 1mb they seem to have close to the same pins.

    C1 (blue 516k) 46 TPS 5V Reference
    C1 (green 1mb) 46 5V Reference

    C1 (blue 516k) 60 TPS Low Reference
    C1 (green 1mb) 60 Not Used

    C1 (blue 516k) 14 Throttle Actuator Control Serial Data
    C1 (green 1mb) 14 UART Serial Data

    C1 (blue 516k) 15 Throttle Actuator Control Serial Data
    C1 (green 1mb) 15 UART Serial Data

    C2 (red 516k) 24 TPS Sensor Signal Pin "C"
    C2 (red 1mb) 24 Not Used
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  6. #6
    Senior Member
    Join Date
    Mar 2007
    Posts
    175

    Default

    Yeh thats what I got....so how does the 1mb read tps as it has a sensor in the throttle body

  7. #7
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    I imagine thru one of the UART Serial Data pins.
    Maybe C2 (red) 24 can be used like the 516k
    I think another question is how will the PCM react without ETC,
    aren't all 1mb PCMs ETC only.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  8. #8
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    570

    Default

    didnt reply to email after i found out i can attach a XLS

    that should help you out.. lemme know if you need any help
    Attached Files Attached Files

  9. #9
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    570

    Default

    http://holdencrazy.com/EFILive/modifiedTunes.php

    Holden crazy has a 06 chevy express van with cable throttle and 1mb pcm..

  10. #10
    Senior Member
    Join Date
    Mar 2007
    Posts
    175

    Default

    Awesome thanks,

Similar Threads

  1. Tune for my 2003 GMC Sierra 5.3L?
    By LM7Tuner in forum Gen III V8 Specific
    Replies: 6
    Last Post: September 8th, 2009, 06:11 AM
  2. 2003 h2 and 04 saturn ion
    By blackdeath in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: February 17th, 2009, 05:09 PM
  3. 2003 Ls7
    By jfpilla in forum Gen IV V8 Specific
    Replies: 15
    Last Post: May 25th, 2007, 12:33 AM
  4. 2003
    By jay p in forum Duramax LB7
    Replies: 3
    Last Post: April 13th, 2006, 10:28 AM
  5. 2003 Silverado OS upgrade
    By John in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: October 3rd, 2005, 02:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •