V2 asking for license again

[GAMEOVER]

So just to clarify; you were flashing the PCM fine and then it just suddenly changed to 0's and wants another license?

Are you are on at least 7.5.5 Build 88 right and latest V2 firmware?

Can you send a screenshot of the 'Help->FlashScan V2 VIN Licensing' screen to me at support@efilive.com?

May as well send the BLX to paul@efilive.com as well and copy me.

Yes, I was flashing the PCM fine and then FlashScan changed the serial# to 00000's and then it went thru the bootloader segment and issued a new serial# which was totally different from the original serial# & that's when FlashScan didn't recognize the serial# and asked for another Vin License.... I went thru this about 3 different times before I gave up.... Each time I tried to flash the PCM, Flashscan would give a different serial#

[GAMEOVER]

Info sent...

[Blacky]

One thing you may like to try is to full flash a completely stock OS so that the serial number can be restored correctly. Then cal flash your cals back in.

I have a theory that the file you are using to full flash has a fault in the NVRAM section which is causing EFILive to fail to fix the serial number during the full flash. Using a stock OS that (hopefully) does not have that same fault, may allow EFILive/FlashScan to recover the serial number correctly.

Let me know if that works.

Also, send me you FlashScan serial number so I can replace the license for you.

Regards
Paul

[GAMEOVER]

Thanks Paul, Tune file & serial number sent to paul@efilive.com