Results 1 to 5 of 5

Thread: Cleaning the V2

  1. #1
    Member JAY4SPEED's Avatar
    Join Date
    Mar 2007
    Posts
    88

    Default Cleaning the V2

    I've got some greasy smudge marks on the keys of my V2. What is the best thing to use to get the grease off without marring the finish of the keypad? Wiping it off dry just isn't getting the job done. Thanks!

    Jay

  2. #2
    Senior Member whackem04's Avatar
    Join Date
    Apr 2009
    Posts
    116

    Default

    microfiber cloth no fluids
    for all electronics
    01 GMC Sierra 1500 SLE 5.3 cam swap
    Tuned by ME (COS 5 - running strong and smooth)

  3. #3
    Lifetime Member
    Join Date
    Jul 2004
    Posts
    640

    Default

    409 or Simple Green on a small piece of paper towel. The keyboard is waterproof, but be careful with the screen over the LCD or you'll scratch it. Always get the towel just barely damp and then wipe the unit, that way no liquid gets inside.

    Ira

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I a new white T-shirt, it's softer than a paper towel... do like Ira says, barely damp...

    I have used MAF cleaner like this, but I was very quick/careful.

  5. #5
    Member JAY4SPEED's Avatar
    Join Date
    Mar 2007
    Posts
    88

    Default

    Thanks so much for the responses. I didn't want to ruin the graphics on the key pad. I'll try the simple green solution mix.

Similar Threads

  1. Fuel Injector Cleaning Question
    By esco35m in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: October 6th, 2007, 07:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •