Having some issues with BBR. $0101:No Data Recieved

[BlackGMC]

well i installed the latest pre release, updated the firm ware to the newest as described in the instructions. I was able to connect to my truck, (BTW it is an 04 GMC Sierra w/4.8, running COS3 04073003), it downloads just fine no errors. Then when i go to pull the tune off the V2, i get

$0101: No Data Recieved...


I have tried formating and reloading all the config files, creating new option.txt file,.... I choose the LS1B module...


Also the file itself shows to be 499k, instead of 726k like my regular files....

[joecar]

You mean the file only partially uploads to your PC... (only 499K out of 726K)...?

[BlackGMC]

Nope, i mean when i look at the EFI Explorer under the tune part it only show 499k. Then when i drag that file off the exploer is when i get the error

[Blacky]

Before trying to drag the file from EFILive_Explorer to Windows Explorer, open the Trace window. To do that, click on the "drop down button" in the lower right corner of EFILive_Explorer and select "Hide/Display Trace Window". Then if the transfer fails, copy the data from that window to an email and paste it in this thread.

Regards
Paul

[BlackGMC]

thanks Paul, i will do that in a little while or tomorrow morning. I am on my work laptop.

[joecar]

This is the same as what I see on my MacBook running WinXP...

See attached files.

[BlackGMC]

Here is my trace file and screen shot, notice the size of the tune, 499k, when my 04 truck tune is 726k



from trace:
AddSourceFile \EFILive\Tune\LS1_0004.ctd Size=510473
onGetStream: \EFILive\Tune\LS1_0004.ctd

[Brian1]

You might get a new 2gig or smaller sd card and try again. Some sd cards just die.

Brian

[BlackGMC]

it works fine for my logs

[Blacky]

Here is my trace file and screen shot, notice the size of the tune, 499k, when my 04 truck tune is 726k

from trace:
AddSourceFile \EFILive\Tune\LS1_0004.ctd Size=510473
onGetStream: \EFILive\Tune\LS1_0004.ctd

With EFILive_Explorer running, before attempting to drag the file from EFILive to Windows, can you do this:
1. Open EFILive_Hapi (double click on the FlashScan icon in the system tray at the end of the Windows Task bar).
2. Select the F8: Trace option.
3. Click [Clear].
4. Drag the file from Explorer to Windows.
5. Click [Refresh] in the EFILive_Hapi Trace window.
6. Save the trace file (*.rtf) and attach it to this thread.

Regards
Paul