hi i have efi live v4 software and cable from when i owned a vr i am just wandering can i use the same cable and software to tuning my vy commodore. if it is possible would anyone have a vechile file for the vy commodore in .xml format. thx
hi i have efi live v4 software and cable from when i owned a vr i am just wandering can i use the same cable and software to tuning my vy commodore. if it is possible would anyone have a vechile file for the vy commodore in .xml format. thx
The VY 5.7 liter requires EFILive V7.x and can be scanned and tuned using FlashScan V1 or V2.
The VY 3.8 liter can only be scanned by EFILive V4. WE don;t offer tuning for VY 6 cylinders.
Regards
Paul
Before asking for help, please read this.
if you can use efi v4 to scan vy v6 commodore does anyone have a vehicle file or know where i can get it from
We haven't moved these across to the new site yet. Here is a link to the file: http://209.132.211.34/download_V4xml/gmh-vy6.zip
Andrew
EFILive Crew
thx. you have all been very helpful
Hi,
I've got a V8 VY Monaro and have a 9 pin RS232 ALDL cable (which I used to use with my V6 VR).
Could you confirm this serial cable will work with the VY V8 Monaro and EFI Live V7?
Thanks.
John
Before asking for help, please read this.
On the software side:
EFILive V7 is the correct software for VT series II thru to the latest model VE commodore V8s.
EFILive V4 is compatible with VN, VP, VR, VS and VT series I (V8s). And for VN, VP, VR, VS, VT, VX and VY V6's
On the hardware side:
EFILive V7 software uses FlashScan V1 or V2. V1 supports VT-II thru VZ (non HSV) and V2 is for ALL VT-II to current V8 commodores.
EFILive V4 software uses various ALDL interfaces but NOT FlashScan.
We intend to add software to the next version of V7 (called V8 - not to be confused with V8 engines) that allows you to scan and log ALDL vehicles using FlashScan V2.
Hope that is not too confusing.
Regards
Paul
Last edited by GMPX; March 1st, 2009 at 05:35 PM. Reason: Sorry Paul, had to correct your V6 models, VZ V6 is CAN.
Before asking for help, please read this.
I think so
What you're saying is that I need EFI Live V7 as well as the hardware (FlashScan) ?
Is there any way I can avoid purchasing the hardware, but use V4 or V7 of EFILive to read limited data (I'm interested in seeing stored fault codes, and viewing the oxygen sensor's signal).