Connection drops

[Alexo1us]

I got a chance to try today I did validate pids but it kept asking to register.
I checked the register info twice still wouldn't come out of demo mode. I guess this could be why it didn't allow for any monitoring or logging.
I have reinstalled the software hopping this will correct the problem
Will try again tommorrow.
Alex

[joecar]

Are you entering the correct registration info from the blue card, exactly as shown on the blue card...?

[Alexo1us]

I did not get a blue card, but the only thing thats slighty different is date i use the calender option to set it to Oct 23, 2009 (m/d/y) but the issue date from the email has this 20091023 different format (t/m/d).
Could this be the problem?

[mr.prick]

I did not get a blue card, but the only thing thats slighty different is date i use the calender option to set it to Oct 23, 2009 (m/d/y) but the issue date from the email has this 20091023 different format (t/m/d).
Could this be the problem?

Use what you got in the email,
just paste it into the license.txt it's quicker.
[License.1]
Serial=000000000000
RoadRunner=
Type=Scanner
Issued=20000101
Key=????-????-????-????

Is anyone else losing connection while logging (pass thru)
with this FW?
Id like to at least go back to the previous version.
That is not possible anymore though.

[minytrker]

Since the last update my precious V2 looses connection to
the PCM while logging for unknown reasons.
This is unpredictable and quite annoying.
Am I the only one going through this?

No, I am having the same problems.

[Alexo1us]

I can't enter it in the format as 20091023 y/m/d as listed only 23-Oct-2009 can be entered.
Hopfully the reinstall will work
Thanx
as for the disconnections I think it has to do with my bad battery since my AT software has the same issues (more so)

[mr.prick]

Open the license.txt in
C:\My Documents\EFILive\V7.5\User Configuration
and paste the info from the email.

[Alexo1us]

Thanx just checked that file it is entered in that format thanx.
Hopfully it will work now
I
'm running vista I'm wondering if the uac being on may have something to do with it will turn it off for test

[Blacky]

Is anyone else losing connection while logging (pass thru) with this FW?
Id like to at least go back to the previous version.
That is not possible anymore though.

As soon as it loses connection, stop logging and save the trace file on the FlashScan device. Then copy the trace file from FlashScan onto your PC and email it to me along with the log that was being recorded.

The more info I get about this the sooner I will be able to track down the cause.

Regards
Paul

[Tre-Cool]

Hmm, im starting to suspect this may have been 1 of the problems i was experiancing under windows 7.

logging through the laptop after about 15 minutes and the logging screen would just "lock-up". efilive itself wasnt locked the screen just froze. I would have to press stop recording button save log and start again.

This was happening while logging an e38 on a ve commonwhore.