Not the IAT Stuff particularly, I am working with Jesse getting everything dialed in and looking at my scans the PCM is not commanding the right AFR for the corresponding kpa.
Not the IAT Stuff particularly, I am working with Jesse getting everything dialed in and looking at my scans the PCM is not commanding the right AFR for the corresponding kpa.
2000 Corvette Twin Turbo
2004 CTS-V TVS 1900
2006 TBSS TVS 1900
All Tuned by
Rad Tunes by Troy
aka Vetteboy2k
That is weird! If you are already working with Jesse, then I am unlikely to be able to help at all :cry:Originally Posted by vetteboy2k
Andrew
EFILive Crew
I sent the files to Paul before I left for L.A, I'm sure he'll get them up soon enough.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Ross, have fun at SEMA.
8)
Hi Ross,
The latest down loads don't have the 'a,b' after the file name, which could be my reason for the no start.
Could you confirm this? It's possible I've done something wrong.
Cheers Scotty.
It's a lot easier to ask for forgiveness than it is to ask for permission.
I noticed that also, but the file modification times on all the files were updated within the last 10-15 days or so. So I assumed that they were the new ones with the IAT multiplier table.
Anyway, I have a 2002 Holden Commodore, OS 01290003 which is working fine. I'm guessing that this is the same OS that you want to use :wink:. My car is N/A, but I'm not sure that would make any difference.
PS: Nice website by the way, I see you represent SS Inductions (know them well).
Cheers,
Andrew
EFILive Crew
The OS 01290002 works fine; i had to use it to get him going for now.
I used the very same OS V3 on a car on Saturday before I down loaded the current updates and had no problems.
Cheers Scotty.
It's a lot easier to ask for forgiveness than it is to ask for permission.
I'm using 1270003 and it has the IAT stuff in it...
2001 Camaro SS
EFILive Custom OS3
FYI I installed the newest updates and did not have a problem. I would check where you unzipped the files.
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
I get a "floating point division by zero" error when opening any custom OS's after the upgrade. I reverted back to before the update, and it's gone. I've tried the upgrade 11 again, same deal, Floating point error.
Posting Permissions
Reply With Quote
