Page 4 of 4 FirstFirst ... 234
Results 31 to 34 of 34

Thread: roadrunner not found

  1. #31
    Member
    Join Date
    Mar 2007
    Posts
    94

    Default

    using a usb cable straight to the little daughter board in the pcm got rid of ALL connection problems for me...ALL of em

  2. #32
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    On the screw in connector, make sure the pins are not pulled back.
    If they are unseated you will have problems.
    That weather proof connector can be unscrewed and you can push the pins in.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #33
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,356

    Default

    Quote Originally Posted by Cablebandit View Post
    using a usb cable straight to the little daughter board in the pcm got rid of ALL connection problems for me...ALL of em
    Yep! Me too.
    I can't understand why you guys seem to be against doing this?
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  4. #34
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568

    Default

    I think the only reason a lot of people don't do this is they do not want to pull their RR apart , or they are not experiencing these problems. I know if I didn't have to touch any of mine I wouldn't.
    It's all good until it goes "Bang"

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. WB not found
    By driver456 in forum FlashScan V2
    Replies: 9
    Last Post: May 30th, 2010, 02:59 PM
  2. Options.ini not found
    By VHR in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: July 13th, 2008, 10:54 AM
  3. no controller found
    By mr.prick in forum FlashScan V2 BB Logging
    Replies: 15
    Last Post: April 8th, 2008, 11:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •