I have a question or two, if you get your main VE table dialed in using stock injectors and fuel pressure then down the road you install larger injectors and update B4001 injector flow rate accordingly does the main VE table B0101 change in value?
Also, with the Holley fuel injection, the main map's numbers were in relation to the injector on times, so you could always take a number in the MAP and apply a basic formula and you will get the injector ms on time, it also worked the other way if you take the logs and look at the injector times you could figure out the number in the MAP. So what does the numbers in EfiLive stand for?
And lastly, if at WOT you have a value of 115 with stock injectors then install larger ones and update the injector table, does the value of 115 inject more fuel then the stock injectors? Or would it be identical because the injector flow rate was modified?
Lee