Like the title says very minor error but in the intrest of correctness I thought I would bring it to your attention

highlighted in red below i believe it should be 06 not 05. This is from the pids decription list for the scan and tune program.

STATE05 [1] State 05
DFCO Decel Fuel Cutoff (Inactive,Active)
COLDST Cold Start Conditions Met (No,Yes)
FTLEARN Fuel Trim Learn Status (Disabled,Enabled)
HO2S22R Heated O2S Bank 2 Sensor 2 (NotReady,Ready)
HO2S21R Heated O2S Bank 2 Sensor 1 (NotReady,Ready)
HO2S12R Heated O2S Bank 1 Sensor 2 (NotReady,Ready)
HO2S11R Heated O2S Bank 1 Sensor 1 (NotReady,Ready)
FTLOOP Fuel Trim Loop (Open,Closed)

STATE06 [1] State 05 FAN2 Fan Control Relay 2 and 3 Command (Off,On)
FAN1 Fan Control Relay 1 Command (Off,On)

STATE07 [1] State 07
IACTST IAC Test (Enabled,Disabled)