Results 1 to 3 of 3

Thread: throttle pulse

  1. #1
    New Member lb7blksmk's Avatar
    Join Date
    Nov 2009
    Posts
    7

    Default throttle pulse

    i loaded a tune in my lb7 the other day and right at start up it through a mass air flow code. and the throttle pulses at low speed around 10 and lower. could it just be an error while loading it or does it just sound like the tune? thanks for any help.
    David; Metalic Black 03 LB7

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Try flashing the previous tune back in and see if the problem goes away.
    If it does then you could look at the tables changed and figure out which one caused it.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    New Member lb7blksmk's Avatar
    Join Date
    Nov 2009
    Posts
    7

    Default

    well i went from a small tow tune to a larger tune. ive had it in before and it did the same thing but my tuner loaded it again and it stoped pulsing and i had no more codes.
    David; Metalic Black 03 LB7

Similar Threads

  1. how to tune throttle follower and throttle cracker?
    By z28ls1818 in forum Gen III V8 Specific
    Replies: 2
    Last Post: September 19th, 2010, 03:43 PM
  2. LMM Pulse table
    By killerbee in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 26
    Last Post: October 30th, 2009, 09:33 AM
  3. No spark??? No injector pulse.
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: February 14th, 2009, 03:19 PM
  4. PWM Pulse Width Modulation
    By z06this in forum Gen III V8 Specific
    Replies: 0
    Last Post: September 26th, 2008, 01:21 PM
  5. Small Pulse Adjust/Low Pulse Width Injector Offset
    By N0DIH in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: September 4th, 2007, 09:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •