HELP new calc.pid for current shipping LC-1

[mr.prick]

Turn off UAC w/Vista then try installing the driver for the serial converter.
Is the LC-1 powered up when asked "please connect device" message or
is the problem with no having the serial converter driver installed?

With the LC-1 and Flashscan cable I used a null modem only, no gender bender in between.
You can make a direct cable with the pinout in my sig.

[kwhiteside]

Got the Programmer working.

Had to power ignition, wait, usb into notebook. Install drivers, the prolific usb to serial is the correct one for my cable. Let it install. Doesn't work because it defaulted to Com4. Find your way to device manager then ports (cable has to be plugged in and powered up for it to even show as a port) change to com1. Restart LM Programmer and voila!

Change out 1 to match out 2. Also noticed it was not setup for GASOLINE in the first setup page so switched that and hit program.

I'll don't know if the GAS setting could effect the serial connection or not, but I'll try both analog and serial tomorrow. Have my BBL setup with two different PID sets, one does analog1, the other does serial.

(BTW, glad you guys showed me how to tune by LTFT's)

[kwhiteside]

Everything is working now. Serial and Analog!

[joecar]

Cool...