Results 1 to 5 of 5

Thread: Tow tune throwing s P0401 and P0101?

  1. #1
    Senior Member
    Join Date
    May 2009
    Posts
    105

    Default Tow tune throwing s P0401 and P0101?

    Both of these are turned off not reporting, is there another place I should be looking? Is it maybe something else causing this? THx for your time
    06 LBZ CCSB
    A few bolt on's!

  2. #2
    Lifetime Member vortecfcar's Avatar
    Join Date
    Apr 2007
    Posts
    536

    Default

    Tables C0901 - C0908 can be set to disallow the MAF test. Set the numbers to allow the widest variance, or to RPM/ECT levels higher than actual running conditions. The EGR code is not likely causing a MIL.

    Nick

  3. #3
    Senior Member
    Join Date
    May 2009
    Posts
    105

    Default

    Thx Nick, I'll give this a shot! THX
    06 LBZ CCSB
    A few bolt on's!

  4. #4
    Senior Member
    Join Date
    May 2009
    Posts
    105

    Default

    Thx Nick! Up and runnin with out codes!
    06 LBZ CCSB
    A few bolt on's!

  5. #5
    Lifetime Member killerbee's Avatar
    Join Date
    Jan 2006
    Posts
    1,079

    Default

    Quote Originally Posted by Tarkstoys View Post
    Both of these are turned off not reporting, is there another place I should be looking? Is it maybe something else causing this? THx for your time
    It is tempting to just defeat the diagnostic, but have you asked yourself why it is happening? MAF diagnostics serve an important purpose, and help keep you from blowing things up into little pieces.

    I had a customer that had out-of-range errors. His MAF was reading low at all performance levels, so I refused the tuning job until we found the source of this problem.
    Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
    Custom Tuning Services
    DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
    EFILive's first VGT "Software Wastegate Tune"

Similar Threads

  1. Could some one help w/ a P0101
    By Tarkstoys in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 15
    Last Post: October 30th, 2009, 10:02 AM
  2. w.b. keeps throwing a code? po1153
    By smslyguy in forum Gen III V8 Specific
    Replies: 27
    Last Post: September 24th, 2009, 03:48 AM
  3. help with p0101 code, tune file attached
    By adam1803 in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 25th, 2009, 12:05 PM
  4. P0506 & p0101
    By odd boy in forum Gen III V8 Specific
    Replies: 3
    Last Post: January 30th, 2009, 05:06 PM
  5. Strange throwing codes 1133 & 1153
    By DaddySS in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: September 13th, 2007, 08:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •