Results 1 to 4 of 4

Thread: FAST dual WB to EFI V1

  1. #1
    Junior Member
    Join Date
    Sep 2008
    Posts
    12

    Default FAST dual WB to EFI V1

    I have searched and followed the tutorials I have found, but I am having problems.

    The Fast PID is shown as unsupported (grayed X out)
    I have the EXternal outputs hooked up as shown and ran the check for supported PIDS, but they remain grayed out.

    What is it that I am missing?

    Thanks,
    Rick

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    You need to have {EXT.AD1} & {EXT.AD2}
    If they are then select the F.A.S.T PIDs even though they are not valid and start a log.
    Sometimes a PID(s) will be crossed out before a log starts but
    once logging starts they become valid.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Junior Member
    Join Date
    Sep 2008
    Posts
    12

    Default

    Quote Originally Posted by mr.prick View Post
    You need to have {EXT.AD1} & {EXT.AD2}
    If they are then select the F.A.S.T PIDs even though they are not valid and start a log.
    Sometimes a PID(s) will be crossed out before a log starts but
    once logging starts they become valid.
    Thanks Mr. Prick, I missed those 2 PIDS,I did have the other 4 selected.
    SO just for future clarification and hopefully to help others a total of 6 PIDS must be selected for the FAST dual WB right?:
    EXT.AD1
    EXT.AD2
    CALC.AFR_F1
    CALC.AFR_F2
    CALC.BEN_F1
    CALC.BEN_F2

  4. #4
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Yes.
    Always have the {EXT.AD}s selected at the least
    You can add the calc_pids that are based of them after the log is saved.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

Similar Threads

  1. Dual Fast Wideband
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: February 18th, 2010, 03:37 PM
  2. need help installing fast dual wideband
    By red83 in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: December 19th, 2008, 06:01 AM
  3. FAST DUAL O2's
    By alz28 in forum Tutorials
    Replies: 20
    Last Post: August 28th, 2008, 05:54 PM
  4. Anyone try the FAST dual wideband setup?.................
    By FreddyG in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: December 23rd, 2007, 04:08 PM
  5. dual fast 90 set up
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: June 7th, 2006, 12:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •