Results 1 to 4 of 4

Thread: RPM Threshold for Airflow Calc {B0120}:

  1. #1
    Junior Member
    Join Date
    Aug 2009
    Posts
    16

    Default RPM Threshold for Airflow Calc {B0120}:

    I have a L98 6.0 Chevy lumina 2008 (Holden) e38 ecm. I can't seem to find B0120. How do i ensure that i stay in MAF across the rpm range. I am busy calibrating the ve tables as per the tutorials and having some success, i want to calibrate the MAF on Friday and just want to be sure that i have not missed anything

    Mark

  2. #2
    Lifetime Member GAMEOVER's Avatar
    Join Date
    Aug 2008
    Posts
    1,304

    Default

    {b8024} & {b8025}
    2008 2WD Ext.Cab Silverado 1500 6.0 V-MAX E38(L76) & T42(4L70E) MAF Only CL Corvette Servo AFE CAI INNOVATIVE LM-2 WBO2

    FLASHSCAN V2 & AUTOCAL

  3. #3
    Junior Member
    Join Date
    Aug 2009
    Posts
    16

    Default

    gameover, thank you, i would never have found it. should i set the values higher when i am setting vve (MAF is disabled as per tutorial) and once vve are calibrated and i start calibrating maf go to 400rpm for full MAF

  4. #4
    Lifetime Member GAMEOVER's Avatar
    Join Date
    Aug 2008
    Posts
    1,304

    Default

    To tune MAF only set B8024 = 400 & B8025 = 10
    2008 2WD Ext.Cab Silverado 1500 6.0 V-MAX E38(L76) & T42(4L70E) MAF Only CL Corvette Servo AFE CAI INNOVATIVE LM-2 WBO2

    FLASHSCAN V2 & AUTOCAL

Similar Threads

  1. Desired airflow won't equal measured airflow
    By Ryan in forum Gen III V8 Specific
    Replies: 9
    Last Post: June 4th, 2008, 08:17 AM
  2. Replies: 12
    Last Post: December 13th, 2007, 10:52 AM
  3. B0120 ?
    By DrX in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: October 24th, 2006, 02:05 AM
  4. Question about calculated airflow vs. measured airflow
    By JR_VETTE in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: October 1st, 2006, 04:37 PM
  5. rpm threshold
    By NviouSS in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 14th, 2005, 05:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •