Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: grams/cyl not matching from tune/ scan tool

  1. December 21st, 2009 #1
    Dmaxink
    Dmaxink is offline
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default grams/cyl not matching from tune/ scan tool

    Ok im sure it is something simple and stupid...taking my shots a gas tuning here.

    Someone please instruct me what im doing wrong, i log and my data is coming up with my KR coming in at 0.060-0.070 at grams/cyl...well my tune tool only goes up to 0.042...

    so therefore how can i tune in the higher cells when i cant view them in the toon tool to edit?? its like i know what to do here but not poissible because for some reason i have something displayed wrong or linked wrong.

    i would appreciate the help!
    thanks guys yall rock
    -Kory
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/
    Reply With Quote Reply With Quote
  2. December 21st, 2009 #2
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Dmaxink View Post
    ...
    i log and my data is coming up with my KR coming in at 0.060-0.070 at grams/cyl...well my tune tool only goes up to 0.042...
    ...
    Kory,

    Which table...? Are you looking in B5913, B5914...?
    Reply With Quote Reply With Quote
  3. December 21st, 2009 #3
    Dmaxink
    Dmaxink is offline
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default

    Yeah man, b5913 and b5914....they only go up to 0.042...my maps produce more than that like 1.16
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/
    Reply With Quote Reply With Quote
  4. December 21st, 2009 #4
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post some screenshots...

    Post your file, I'll look at it later tonite.
    Reply With Quote Reply With Quote
  5. December 21st, 2009 #5
    Dmaxink
    Dmaxink is offline
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default





    thanks for the help!
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/
    Reply With Quote Reply With Quote
  6. December 21st, 2009 #6
    mr.prick
    mr.prick is offline
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    The PID in the map doesn't match the tables linked PID.
    You need to change the map's PID or the cal_link.txt
    I'd change map's PID.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2
    _________________________________________________
    Reply With Quote Reply With Quote
  7. December 21st, 2009 #7
    Dmaxink
    Dmaxink is offline
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default

    see i notice on the spark tables it is oz/cyl and my map in the scan tool is in gram/cyl...is there a way to change this

    or what is the fix? cause my drop down menu in the map only has gram/cyl

    sorry for all the questions guys but this is beating me with the stick! lol
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/
    Reply With Quote Reply With Quote
  8. December 21st, 2009 #8
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Have a look at these...

    Configuring units in scantool/tunetool:
     showthread.php?t=7585
    showthread.php?t=164 <--- see this one in particular (see the last post).
    showthread.php?t=1757
    showthread.php?t=2722
    Last edited by joecar; December 21st, 2009 at 08:02 PM.
    Reply With Quote Reply With Quote
  9. December 21st, 2009 #9
    joecar
    joecar is offline
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You need to do this:

    In tunetool, go Edit->Configure Display Units, find B5913, B5914, and any other tables that use the pids from 1. above,
    select all of those tables, rightclick on these and select Metric; click OK, close tunetool and reopen it.
    Reply With Quote Reply With Quote
  10. December 21st, 2009 #10
    Dmaxink
    Dmaxink is offline
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default

    Joecar and Mr. Prick...class acts!!! got it goin...thanks so mich for the reference material i got it all synced up!!!

    You fellas have a merry christmas
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Similar Threads

  1. Can the scan tool be upgraded to tune?
    By Spdfrk1990 in forum General
    Replies: 2
    Last Post: May 1st, 2009, 04:32 AM
  2. Scan tool match tune tool?
    By zapp168 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 20th, 2008, 05:27 AM
  3. Cannot get scan tool and tune tool linked for cell tracking
    By DuramaxPowered in forum Diesel
    Replies: 4
    Last Post: January 6th, 2008, 11:47 AM
  4. Fit to Scan Tool/Tune Tool
    By limited cv8r in forum General
    Replies: 11
    Last Post: March 3rd, 2007, 06:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules