Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: why does this happen alot? -log reading prob

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member whackem04's Avatar
    Join Date
    Apr 2009
    Posts
    116

    Default why does this happen alot? -log reading prob

    does this happen to anyone else? it does it to lots of logs.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	why.jpg 
Views:	257 
Size:	324.5 KB 
ID:	6938  
    01 GMC Sierra 1500 SLE 5.3 cam swap
    Tuned by ME (COS 5 - running strong and smooth)

  2. #2
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Are one of your number keys stuck down? Looks like it's 'marking' a point in the log.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  3. #3
    Senior Member whackem04's Avatar
    Join Date
    Apr 2009
    Posts
    116

    Default

    no all keys are fineeeeeeeeeeeeeeeeee.
    01 GMC Sierra 1500 SLE 5.3 cam swap
    Tuned by ME (COS 5 - running strong and smooth)

  4. #4
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Quote Originally Posted by whackem04 View Post
    no all keys are fineeeeeeeeeeeeeeeeee.
    It looks like the E key is stuck.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  5. #5
    Senior Member whackem04's Avatar
    Join Date
    Apr 2009
    Posts
    116

    Default

    when i open a log, it doesnt display all the pids i know it recorded.
    01 GMC Sierra 1500 SLE 5.3 cam swap
    Tuned by ME (COS 5 - running strong and smooth)

  6. #6
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Check your software version, and also the firmware if you are using FlashScan V2.

    Software should be at least 7.5.5 Build 88
    FlashScan V2 firmware should be at least 2.06.12

    This was a problem a while back...
    Andrew
    EFILive Crew


  7. #7
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Oh. And the PIDs should all show on the F9 Data tab (not necessarily on the graphs/gauges unless you have specifically changed them to show a different PID.
    Andrew
    EFILive Crew


  8. #8
    Senior Member whackem04's Avatar
    Join Date
    Apr 2009
    Posts
    116

    Default

    7.5.6 build 99
    01 GMC Sierra 1500 SLE 5.3 cam swap
    Tuned by ME (COS 5 - running strong and smooth)

  9. #9
    Senior Member whackem04's Avatar
    Join Date
    Apr 2009
    Posts
    116

    Default

    does anyone else have a problem looking at logs at all or is it me?
    01 GMC Sierra 1500 SLE 5.3 cam swap
    Tuned by ME (COS 5 - running strong and smooth)

  10. #10
    Lifetime Member Cougar281's Avatar
    Join Date
    Jan 2006
    Posts
    882

    Default

    Quote Originally Posted by whackem04 View Post
    does anyone else have a problem looking at logs at all or is it me?
    I've seen that before in my logs, but it's been a while, and it didn't happen often.

Page 1 of 2 12 LastLast

Similar Threads

  1. What will happen?
    By ferramento in forum Allison 5 & 6 Speed
    Replies: 9
    Last Post: February 26th, 2010, 10:27 AM
  2. Alot, Alittle, Close Enough, etc
    By Dale in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: January 11th, 2008, 01:01 AM
  3. Reading an E38 / E67 ECM
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 26
    Last Post: June 6th, 2007, 06:02 PM
  4. 2002-2005 cals have alot more things added to them in latest update :)
    By wait4me in forum LL8 4.2L In-Line 6 - P10 PCM
    Replies: 2
    Last Post: March 30th, 2007, 10:16 AM
  5. Reading the P12 PCM
    By GMPX in forum IL6,IL5,IL4 Atlas Engines - P12 PCM
    Replies: 0
    Last Post: March 18th, 2007, 09:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •