does this happen to anyone else? it does it to lots of logs.
does this happen to anyone else? it does it to lots of logs.
01 GMC Sierra 1500 SLE 5.3 cam swap
Tuned by ME (COS 5 - running strong and smooth)
Are one of your number keys stuck down? Looks like it's 'marking' a point in the log.
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
no all keys are fineeeeeeeeeeeeeeeeee.
01 GMC Sierra 1500 SLE 5.3 cam swap
Tuned by ME (COS 5 - running strong and smooth)
when i open a log, it doesnt display all the pids i know it recorded.
01 GMC Sierra 1500 SLE 5.3 cam swap
Tuned by ME (COS 5 - running strong and smooth)
Check your software version, and also the firmware if you are using FlashScan V2.
Software should be at least 7.5.5 Build 88
FlashScan V2 firmware should be at least 2.06.12
This was a problem a while back...
Andrew
EFILive Crew
Oh. And the PIDs should all show on the F9 Data tab (not necessarily on the graphs/gauges unless you have specifically changed them to show a different PID.
Andrew
EFILive Crew
7.5.6 build 99
01 GMC Sierra 1500 SLE 5.3 cam swap
Tuned by ME (COS 5 - running strong and smooth)
does anyone else have a problem looking at logs at all or is it me?
01 GMC Sierra 1500 SLE 5.3 cam swap
Tuned by ME (COS 5 - running strong and smooth)