V2 in passthrough mode
Is it possible to have the v2 hardware put into a passthrough mode so i can use it to talk to other devices on the obdi port?
not looking to talk to the pcm, in fact it's my dash.
Just wanted to see if it was possible before i looked at buying one of these.
The dash programming is done via a vb program that i have decompiled.
No, the FlashScan V2 can only be communicated with by the EFILive software tools. The device uses proprietary communications protocols, so it would not understand generic OBDII commands.
Andrew
EFILive Crew
what about the v1?
Same deal with FlashScan V1.
Andrew
EFILive Crew
Cheers, i ended up ordering the cable from my first post. Will see how that goes. the program im going to use just requires an aldl cable from the looks of it.Originally Posted by Tordne
Interesting thing i found after decompiling the program is the fact i might be able to rewrite the odometer values and few other things. But not that it's required for that use anyway.
Im a retard, i baught the obdi2 cable because the car is an obdi2 plug, but because the program uses aldl i need to get an aldl cable.
more waiting
Posting Permissions
Reply With Quote