Can some one tell me the correct values for the turbo brake that will work only in tow haul mode that won't hiss all the time and have vane buzz when shutting off the truck. Truck is completely stock. I just want to add the brake. Thanks in advance.
Can some one tell me the correct values for the turbo brake that will work only in tow haul mode that won't hiss all the time and have vane buzz when shutting off the truck. Truck is completely stock. I just want to add the brake. Thanks in advance.
In the desired vanes position tables. (EGR ON and OFF) {since you are stock} in the top 2 rows set the vane position to 80-100 percent depending on what you like. and in the MAX VANE position table set those values in the top 2 rows to MORE that what you have commanded. and for the buzz B1501 set to disable. But you really only get the buzz if you have altered the idling section of the vanes.
'07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that
'06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor
465hp/1008tq---7/25/09---Dyno Day Fast Specialties Tuning by ME
There isn't a way to set it so that it only comes on with tow/haul either...sorry man
Peace Through Torque
Punisher Performance DSP5 Tuning, PPE Dual CP3's, 68mm Fleece Cheetah, Punisher Built trans w/ Suncoast Parts, Airdog 165, SoCal 100% Overs, ARP Studs
2013 NHRDA Sportsman World Champion
www.PunisherPerformance.com
You just have to learn to drive the truck with it on. Keeping your foot on the throttle some while coasting might help.
06 GMC 2500 CCSB SLT LBZ 4X4
These views expressed on this post are not my own, but rather randomly generated computer gibberish, and in no way should be used to judge the author's IQ or mental health.