goes into natural ?
When I stop at a set of light for a period of time the trans seems to go in to natural and will not select any gears until I switch the engine off than restart it and than it will select gears ok. Or sometimes when I drive it and go to park it will not select reverse so i switch it off and restart it and it select ok. Des
what type of car? might be neutral safety switch. Try to see if you can start the car in D, if you can you need a new neutral safety switch. DTC should also show P0700, P0708, P0847, P0872, P0875, P1711 and P1713.
Last edited by vxchev8; January 5th, 2010 at 03:25 AM. Reason: edit dtc
I would assume a duramax seeing as he posted it in the allison section...Originally Posted by vxchev8
to the original poster- you need to find out what codes it is setting.
2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison12.9s @ 108 mph
many thanks to Ross and Paul
I would assume a duramax seeing as he posted it in the allison section...
to the original poster- you need to find out what codes it is setting.Only notice "Australia" in his profile, didn't look up to see it was in the Allison section
it's in a f350 I bought an adapter and stand alone computer from destroked.
call destroked.
2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison12.9s @ 108 mph
many thanks to Ross and Paul
There stand-alone set-up uses a standard 03-04 DURAMAX calibration in the TCM, so you need to have it scanned with a TECH II or EFILIVE and see what codes it is setting in the TCM.
1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.
Posting Permissions
Reply With Quote