Brake Torque Management Screen Shots Needed

[gmh308]

All you need to do is change B2523 (in the ECM) to Yes, then when you switch off the traction control the BTM system is also disabled.

Should B2523 be in E40 OS's too?

[ScarabEpic22]

Should B2523 be in E40 OS's too?

No, see post #14: E40 BTM

Different tables for different ECMs, just how it goes.

[ToXshoX]

I was wondering on my 2006 TBSS when parameter B0701 is valued at disabled which it was from stock, does that mean when traction control is off all torque management is off as well? Are there other parameters that allow the torque limits to come into play as well? Like B0505? Also wondering probably not safe but i guess if you disable torque reduction by spark fuel and throttle it would never limit anything? Also wondering if you can apply more torque to the rear axle vs the front like in the limits everything is set to 50 for front and rear torque, Just figured that perhaps a awd tbss might be able to slip a bit when lauching here are my limit settings stock.

No, see post #14: E40 BTM

Different tables for different ECMs, just how it goes.