Help finding parts for older CWC0003 FJO Wideband.

[njoossens]

Hello. I am in need of some legacy parts for a CWC0003 FJO wideband I purchased. Was a pretty good deal and came with 2 NTK O2's. It came mostly complete although some of the wires were cut short and did not come with any connectivity cables. I contacted FJO directly and it looks like they do not carry the parts anymore. What I am hoping to get are the following.


1x IWC0002 Installation Kit

1x MWS3000 Software and connectivity kit

Would also be interested in any cables for the NTK O2 SO20001.

Also if anyone knew the serial pinout for this I may be able to create my own cable for it.

[mr.prick]

I found some cables here:
http://www.fjoracing.com/products/WBAFR/parts.php
http://www.alamomotorsports.com/FJO/fjo_wideband.html
You can get the software from FJO's site:
http://fjoinc.com/products/WBAFR/downloads.php

[njoossens]

Thank you. Unfortunately I'm set up for the SO20001 NTK L1H1 sensors, so these won't work for me. Any other vendors that might have these?

[Ira]

You might find it's less expensive to buy two Innovate LM-1s then it is to buy a new NTK sensor. You should be able to get the sensor on ebay or at a Honda dealer, but they were quite dear last I heard.

Ira

[njoossens]

I should be ok with the sensors. I have two. One looks brand new and the other is still in great shape. I was hoping to pick up a longer extension for them possibly. I am unsure how I will end up routing everything, and this one is fairly short. Also if I could find the serial cable. I think I did find a new IWC0002 install kit today.

Those who run these do you hook the serial cable to them and run the computer software for them, or generally just hook them to the EFIlive and let it do it's thing?