LMM 12628594 calz update

[GMPX]

This is not an 'official' release, it's for those who've been involved in THIS thread or want to play around with some new tables.

New tables are for Fuel Pressure modifiers and turbo P.I.D control.

Extract the zip file in to :
Program Files\EFILive\V7.5\Calibrations\E35

New calz info should show as V7.25, January 27, 2010

Cheers,
Ross

[GMPX]

Zip includes the DSP versions of this OS too.

[bballer182]

So B2252-B2254 changes the way the P, I, and D components work based on MM3 and RPM? weird...

Is this just a LMM thing or do those boost P.I.D. controllers exist in the LBZ too?

took a look at the pressure issue that guy was having and the multipliers and modifiers didnt change the pressure really at all. it looks like he is really running in the high alt tables

[GMPX]

I've not looked at the LBZ yet, but I'd say they will be in there, maybe not exactly the same, lets see if they are useful first.

On the pressure issue, I'm at a loss, I am 99.9% it's all correct in the tune tool, but I noticed those multipliers really do little once the engine is up to temp.
This 'error' if it is will be in all the DSP tables too as they use those base tables too.

Cheers,
Ross

[bballer182]

I've not looked at the LBZ yet, but I'd say they will be in there, maybe not exactly the same, lets see if they are useful first.

On the pressure issue, I'm at a loss, I am 99.9% it's all correct in the tune tool, but I noticed those multipliers really do little once the engine is up to temp.
This 'error' if it is will be in all the DSP tables too as they use those base tables too.

Cheers,
Ross

Wish i had an LMM to test on so i/we could do the testing like we did on the vane tables for the LBZ way back...

[duramaximizer]

I think I will go out and do some logging and see what I can come up with on how far it may or may not be off.

I just wish I had a big burtha CP3 that was giving me problems regulating.

[bballer182]

For those of you who are going to be logging I have updated the cal_link.txt file so your logs will give you good data. It includes ALL new tables just released.

[duramaximizer]

I am sorry to be stupid, but I have to know where exactly this has to be saved to.

I think I found it ...... 7.5 /configuration?

[mr.prick]

This is not an 'official' release, it's for those who've been involved in THIS thread or want to play around with some new tables.

New tables are for Fuel Pressure modifiers and turbo P.I.D control.

Extract the zip file in to :
Program Files\EFILive\V7.5\Calibrations\E35

New calz info should show as V7.25, January 27, 2010

Cheers,
Ross

C:\Program Files\EFILive\V7.5\Calibrations\E35

[duramaximizer]

I was talking about the cal link.txt.

Anyway, after checking this out further, I am still convinced that the high and low needs to be switched.

According to what I know.

{base+(ectt x etcm) +(iatt x iatm) + (ftt x ftm)} (barom)=commanded MPa

Where ect is eng coolant temp table and etcm is engine coolant temp modifier
etc etc for intake air temp; fuel temp table; and baro is an actual sensored number for the multipier.

According to this log command MPa is 30+-.

High Altitude

{30+(15 x 0)+ (0X0)+(0X0)} 1=30


Medium Altitude

{55+(15 x 0)+ (0X0)+(0X0)} 0=0

Low Altitude

{60+(15 x 0)+ (0X0)+(0X0)} 0=0

Only 1 solves my equation, if my equation is correct.