Results 1 to 4 of 4

Thread: Need Help 0411 PCM

  1. #1
    New Member
    Join Date
    Oct 2007
    Posts
    4

    Default Need Help 0411 PCM

    Gentlemen: I am a newbie here but not to EFI. Have a project wherein the 0411 PCM will be used with a Small Block Chev (SBC) in the same manner as S10(EFI connection). The 383 SBC is built and has a 236/242 @.050 camshaft with 1.6 rockers for an honest .600 lift at the valves using solid roller camshaft. With a 650 CFM carb right now on a run-in stand it wants so much fuel that it will not idle below 1500 RPM. Shooting for 500 HP and 500 Ft/Lbs Torque and will be installed in a Datsun 240Z with T56 trans. Have a 2003 Corvette Drive by Wire Throttle Body and 2006 5 wire MAF. Need to get a 24x reluctor wheel from EFI connection and already have Vortec distributor for camshaft sync. Have obtained harness. Need to get this all worked out on the test stand with EFI Live hardware and software.

    Need comments as to tune file and installing this Gen III EFI. Thanks.

  2. #2
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    I would start with a 2002 F-Body tune. You will need the injector and coil wiring switched for the Gen1 engine running a Gen3 tune. Typically a larger cam wants Less VE and More timing in the idle areas.
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

  3. #3
    Lucy
    Guest

    Default Need Help 0411 PCM

    the console was saying that you had PB integrity errors.. if thats any help.. Cant think of anything try, except for maybe re-installing again. Also try to terminate any programs that might be running in the background..

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Lucy View Post
    the console was saying that you had PB integrity errors.. if thats any help.. Cant think of anything try, except for maybe re-installing again. Also try to terminate any programs that might be running in the background..
    What are you talking about...?

    Edit: on second thought, Banned.

Similar Threads

  1. 0411 pcm wiring??
    By onegonewild in forum Gen III V8 Specific
    Replies: 10
    Last Post: May 16th, 2020, 01:45 AM
  2. where can I find 0411 pcm ?
    By ammarii in forum Vortec V6/V8 Specific
    Replies: 13
    Last Post: May 12th, 2015, 03:41 AM
  3. 0411 Swap???'s
    By GAMEOVER in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: May 24th, 2011, 01:25 PM
  4. 1996 7.4 with 0411 PCM
    By GAMEOVER in forum Vortec V6/V8 Specific
    Replies: 2
    Last Post: June 5th, 2010, 12:22 PM
  5. Custom OS on 0411 PCM for L31 Vortec?
    By N0DIH in forum Custom Operating Systems
    Replies: 11
    Last Post: October 24th, 2007, 03:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •