Thanks Joe, for the firmware update note. I updated the software and firmware. I removed the non-functioning LC-1, powered directly off of an isolated battery. It took about 20 attempts but it finally connected with LM Programmer and I re-flashed the firmware (which actually downgraded from 1.21 to 1.10 as this was the version listed on the innovate site). Everything works perfectly now. I adjusted stoich to 14.2 in the LM Programmer and in B3601. Truck feels like it's running well and strangely enough it actually seemed to get better fuel mileage today.
Attached is a log of the PID's you asked for Joe, as well as some others.
If all looks good I'm going to try and do some actual CALC.VET work tomorrow.